Abstract Using natural fibers in composites presents a wide range of applications, from furniture to airplanes. In polymeric composite, the use of fiber is to boost strength and stiffness. However, this material presents low mechanical properties compared to virgin polymers due to hydrophilic nature of the fiber and hydrophobic nature of the polymer. It can result in weak bonding matrix/fiber which may cause incompatibility problem in bonding fibers with most of the polymer matrices. To achieve compatibility between surfaces there is a need to modify them, and one alternative is using coupling agents. Maleated coupling agents stand out as option, but their source is petroleum-derived polyolefin. Researchers have been seeking for more environmentally friendly alternatives to replace these materials. Therefore, this work aims to bring a comprehensive review of the mechanical behavior of maleated and ecological coupling agents. Based on the literature, resistance, flexural, and tensile strength were properties discussed. applications airplanes composite stiffness However matrixfiber matrix matrices them option petroleumderived petroleum derived polyolefin materials Therefore literature resistance flexural discussed

Biodiesel is an alternative fuel obtained from different biomass sources and processes. Nowadays, this biofuel has gained importance due to environmental concerns and rising energy demand. In the biodiesel production chain, stability is a critical issue, as it is linked to the maintenance of its original properties. This work performed a study evaluating the influence of storage conditions on the quality aspects of biodiesel. Thus, different samples of biodiesel obtained from soybean and frying oils were produced and placed in containers made by plastic, glass and tin, and stored in presence or absence of an oxidative atmosphere, moisture and light. These samples were analyzed to evaluate the ester content, acidity, iodine value, kinematic viscosity and oxidative stability. The characterization with GC-MS and GC/FID were done aiming to determine the chemical composition. Blends with frying biodiesel into soybean biodiesel have also been produced in concentrations ranging from 1%, 5% and 10% (m/m) in order to evaluate the mixing effect. In the initial storage time, all tested parameters were in accordance to the legislation. Distinct behaviors were identified for each sample according to the container type, being the glass the most effective of them in maintenance of biodiesel characteristics.

In this work, cracking experiments were performed to carry out the thermal conversion of the mixture of used frying oil and textile stamping sludge in continuous reactor. The textile stamping sludge was used to catalyze the reaction of thermal cracking. The physical and chemical properties of the oil produced were analyzed. Among the results of this analysis the level of acidity in the range of 12 mg KOH/g stands out. Low levels of acidity as this particular mean better quality oil. In this regard it is important that further researches on processes of conversion of residual oil occur.